Note: DO NOT release the function key until the BIOS screen appears. How do I access the BIOS in Windows 7?Ģ, Press and hold the function key on your computer that allows you to enter the BIOS settings, F1, F2, F3, Esc or Delete (contact your PC manufacturer or read the user manual). The UEFI / EFI specification defines a new interface model between operating systems and platform firmware. It is an implementation of the IntelsPlatform innovation framework for UEFI / EFI. A: InsydeH2O is the Insyde software firmware series which is intended to replace the conventional PC BIOS. What is CSM startup?Ĭompatibility Support Module (CSM) is part of the UEFI firmware which provides legacy BIOS compatibility by mimicking a BIOS environment so that older operating systems and some add-on ROMs that do not support UEFI can still be used.

Go to the BootSequence tab in the BIOS and select Add BootOption. Note: If your system is not configured to boot via UEFI, you will need to change it when booting via the BIOS (F2) or via the OneTime Boot menu (F12). How to boot from USB?īoot from USB: Windows How to boot in UEFI mode?īoot mode should be selected as UEFI (not Legacy) in the BIOS, go to General> Boot Order and click Apply. Different PCs with UEFI have different interfaces and functions. It can be stored in motherboard flash memory or loaded from a hard drive or network share at boot time. UEFI is essentially a small operating system that runs on PC firmware and can do much more than a BIOS. Using the installation CD What is UEFI boot mode?

How do I perform a system recovery from the BIOS? On some portable models it works like this: press the F10 key to enter the BIOS (or whatever the correct key is at boot time) immediately press the A key (too advanced) 1 answer How do I enable the advanced BIOS options?

Go to the boot manager and uncheck the Secure Boot option.

Press the F10 key (BIOS setup) several times before calling the boot menu.

Click Troubleshoot → Advanced Options → Startup Settings → Restart.

Simultaneously click on the key combination Restart + Shift.

So how do you disable the insydeh20 Safe Boot Tool?

Press the key to save the settings and restart.

A new window will appear with an empty name for the boot option.

Go to the Boot tab in the BIOS and select Add Boot Option.

Boot mode must be selected as UEFI (not Legacy).

Press and hold the F12 key while entering the boot menu and select the USB drive.

To start this player after many hours of trying, unfortunately only due to an error: With that in mind, how do you boot from the insydeh20 USB configuration utility?

Turn off your computer and restart it with the USB device connected.

Leave the boot list option set to UEFI.

Disable Secure Boot in the boot option.

Boot the computer and press F2 to enter the BIOS.

Insydeh20 Setup Utility How can I get started with the insydeh20 configuration tool?

Insydeh20 setup utility manual